Composite benefits: When are SIPs the right choice?

Issue 41 Words: Rebecca Gross

Many households now factor construction time and expected energy bills into their project bottom line. Could structural insulated panels be an answer to lowering them both?

As cost-effective, resource-efficient and sustainable builds increasingly become a priority, structural insulated panels (SIPs) provide a strong, efficient and lightweight prefabricated alternative for walls, roofs, and floors. The high performance composite building material is a load-bearing structural system consisting of an expanded polystyrene (EPS) insulating foam core sandwiched between two outer engineered skins, typically oriented strand board (OSB), but which may also be magnesium oxide, plywood, sheet metal or fibre cement.

Offering material and structural efficiencies, SIPs are touted for achieving savings in time and money, and creating an airtight and energy-efficient result. But do they live up to the hype?

Costs and construction

While SIPs may have a higher upfront cost than traditional framing, the prefabricated system effectively removes the need for multiple building materials and allows for reduced onsite construction times. Erecting a building in less time should reduce labour costs, but currently there are limited contractors experienced in using SIPs, which can consequently affect the pricing.

“From our experience it is a viable construction technique for any new project, but the lack of experience in the building trades is currently holding it back,” says architect Kieron Gait. He used SIPs for a residential extension and says quoted savings varied from $0 to $20,000 because of contractors’ lack of familiarity with the product. Using SIPs did, however, ultimately save up to four weeks in expected construction time.
Max Capocaccio of MC Architecture Studio has used SIPs in four completed houses to date and says cost savings are attainable, although not always achieved, and stresses that it is essential to have a team familiar with the product. “We have learnt that it is paramount the team works well together from design through to construction. If well coordinated, construction with SIPs can be very effective in time and cost management,” Max says. He adds that a main issue is to reduce weather exposure during construction as moisture can cause damage.

This warehouse-style home in Christchurch, by MC Architecture Studio, uses SIPs for the walls in combination with materials reclaimed from the factory building that existed on the site prior to the recent earthquake. Image: Mick Stephenson

This warehouse-style home in Christchurch, by MC Architecture Studio, uses SIPs for the walls in combination with materials reclaimed from the factory building that existed on the site prior to the recent earthquake. Image: Mick Stephenson

Architecture and design

SIPs are modular in nature and while they can be fabricated to fit a vast range of building designs, it is best to work with the standardised system to take advantage of its efficiencies.

Leaving the SIPs exposed can contribute to savings as it eliminates trades such as painting, however the aesthetic of the cladding may be an influencing factor. Architect David Barr created a warm, textural space using OSB SIPs for an extension in which the client wanted to explore its materiality. “If the material is to be left raw, then it is important to ensure the building team understands the intent of the final finish, so that it is finished neatly and treated with care,” he advises. In contrast, the SIPs panels are covered in Max’s Kingswood House, providing a white backdrop to the exposed timber floor, ceiling and roof trusses that imbue the space with warmth and texture.

This project by Gillian Manning Architecture (near Bacchus Marsh, Victoria, and shown here during construction) uses SIPs comprising two pieces of oriented strand board (OSB) with polystyrene insulation between. The SIPs were treated as a nominated subcontract and the house was tendered traditionally, though this process took a little longer than normal due to the apprehension for building trades for using the material. Mark Lane Quality Builders was receptive to the job, and found they increased the speed of construction from slab and subfloor to ‘lock up’. Image: Hilary Bradford

This project by Gillian Manning Architecture (near Bacchus Marsh, Victoria, and shown here during construction) uses SIPs comprising two pieces of oriented strand board (OSB) with polystyrene insulation between. The SIPs were treated as a nominated subcontract and the house was tendered traditionally, though this process took a little longer than normal due to the apprehension for building trades for using the material. Mark Lane Quality Builders was receptive to the job, and found they increased the speed of construction from slab and subfloor to ‘lock up’. Image: Hilary Bradford

Sustainability and energy efficiency

The sustainability and energy efficiency benefits of SIPs are often key factors for using them. Prefabrication means reduced waste, and the achievement of a high level of airtightness. “The reduction of thermal bridging and high R value are the main aspects taken into account,” Max says; both contribute to a decrease in heat transfer.

Max, David and Kieron express positive client reports about the thermal performance of SIPs. As their homes stay warmer in winter and cooler in summer, artificial heating is reduced, and there is no need for air conditioning. “Our clients’ feedback is that it makes them feel protected,” Kieron says. Questions remain around disposal at end of life, however.

MC Architecture Studio in New Zealand has used SIPs for four projects to date, including Black Door house where they are used for the walls and roof. Image: Mick Stephenson

MC Architecture Studio in New Zealand has used SIPs for four projects to date, including Black Door house where they are used for the walls and roof. Image: Mick Stephenson

Health and safety

SIPs pass fire endurance tests due to their construction as the skins protect the core for a period, but it is advisable to speak to manufacturers regarding product-specific BAL compliance. Fire-resistant plasterboard can be used to improve on the required fire rating.

SIPs that use EPS are a non-toxic building material in that the skins contain no formaldehyde. The airtightness that can be more easily achieved with SIPs can also reduce the need for artificial heating and cooling and contribute to improved indoor air quality – no more dust! Buildings that are airtight may need good mechanical ventilation and humidity control, however, especially if materials with impermeable skins are used.

So, are SIPs the right choice for your home?

It takes time for new materials to be embraced by design and building industries, and for builders to gain experience with products and construction methods. While SIPs are becoming more commonly used as a construction material, finding a builder who is comfortable using SIPs will help you maximise their material, structural and cost efficiencies.


 

Rebecca Gross is a freelance writer, researcher and design historian. She has a master’s degree from Parsons School of Design and is interested in understanding culture through the lens of architecture and design.

Feature image: Architect David Barr says the oriented strand board clad in SIPs created a warm, textural space for this addition to a Federation-era house in Perth. Image: Nic Montagu

ShareShare on FacebookShare on Google+Pin on PinterestTweet about this on Twitter
Cover of Issue 41
You can read more about Composite benefits: When are SIPs the right choice? in Issue 41 of Sanctuary magazine.

Buy it now at our webshop!

Sanctuary: modern green homes is Australia’s premier magazine dedicated to sustainable home design. More...

Subscribe to our newsletter

Did You Know?

Composting toilets can save up to 60,000 litres of water a year for an average home.

ShareShare on FacebookShare on Google+Pin on PinterestTweet about this on Twitter